/* EVERBODY: Please read "APOLOGY" below. -rick 01/06/86
*
* "DHRYSTONE" Benchmark Program
*
* Version: C/1.1, 12/01/84
*
* Date: PROGRAM updated 01/06/86, RESULTS updated 02/17/86
*
* Author: Reinhold P. Weicker, CACM Vol 27, No 10, 10/84 pg. 1013
* Translated from ADA by Rick Richardson
* Every method to preserve ADA-likeness has been used,
* at the expense of C-ness.
*
* Compile: cc -O dry.c -o drynr : No registers
* cc -O -DREG=register dry.c -o dryr : Registers
*
* Defines: Defines are provided for old C compiler's
* which don't have enums, and can't assign structures.
* The time(2) function is library dependant; Most
* return the time in seconds, but beware of some, like
* Aztec C, which return other units.
* The LOOPS define is initially set for 50000 loops.
* If you have a machine with large integers and is
* very fast, please change this number to 500000 to
* get better accuracy. Please select the way to
* measure the execution time using the TIME define.
* For single user machines, time(2) is adequate. For
* multi-user machines where you cannot get single-user
* access, use the times(2) function. If you have
* neither, use a stopwatch in the dead of night.
* Use a "printf" at the point marked "start timer"
* to begin your timings. DO NOT use the UNIX "time(1)"
* command, as this will measure the total time to
* run this program, which will (erroneously) include
* the time to malloc(3) storage and to compute the
* time it takes to do nothing.
*
* Run: drynr; dryr
*
* Results: If you get any new machine/OS results, please send to:
*
* {ihnp4,vax135,..}!houxm!castor!pcrat!rick
*
* and thanks to all that do. Space prevents listing
* the names of those who have provided some of these
* results. I'll be forwarding these results to
* Rheinhold Weicker.
*
* Note: I order the list in increasing performance of the
* "with registers" benchmark. If the compiler doesn't
* provide register variables, then the benchmark
* is the same for both REG and NOREG.
*
* PLEASE: Send complete information about the machine type,
* clock speed, OS and C manufacturer/version. If
* the machine is modified, tell me what was done.
* On UNIX, execute uname -a and cc -V to get this info.
*
* 80x8x NOTE: 80x8x benchers: please try to do all memory models
* for a particular compiler.
*
* APOLOGY (1/30/86):
* Well, I goofed things up! As pointed out by Haakon Bugge,
* the line of code marked "GOOF" below was missing from the
* Dhrystone distribution for the last several months. It
* *WAS* in a backup copy I made last winter, so no doubt it
* was victimized by sleepy fingers operating vi!
*
* The effect of the line missing is that the reported benchmarks
* are 15% too fast (at least on a 80286). Now, this creates
* a dilema - do I throw out ALL the data so far collected
* and use only results from this (corrected) version, or
* do I just keep collecting data for the old version?
*
* Since the data collected so far *is* valid as long as it
* is compared with like data, I have decided to keep
* TWO lists- one for the old benchmark, and one for the
* new. This also gives me an opportunity to correct one
* other error I made in the instructions for this benchmark.
* My experience with C compilers has been mostly with
* UNIX 'pcc' derived compilers, where the 'optimizer' simply
* fixes sloppy code generation (peephole optimization).
* But today, there exist C compiler optimizers that will actually
* perform optimization in the Computer Science sense of the word,
* by removing, for example, assignments to a variable whose
* value is never used. Dhrystone, unfortunately, provides
* lots of opportunities for this sort of optimization.
*
* I request that benchmarkers re-run this new, corrected
* version of Dhrystone, turning off or bypassing optimizers
* which perform more than peephole optimization. Please
* indicate the version of Dhrystone used when reporting the
* results to me.
*
* RESULTS BEGIN HERE
*
*----------------DHRYSTONE VERSION 1.1 RESULTS BEGIN--------------------------
*
* MACHINE MICROPROCESSOR OPERATING COMPILER DHRYSTONES/SEC.
* TYPE SYSTEM NO REG REGS
* -------------------------- ------------ ----------- ---------------
* IBM PC/AT 80286-7.5Mhz Venix/286 SVR2 cc 1159 1254 *15
*
*
*----------------DHRYSTONE VERSION 1.0 RESULTS BEGIN--------------------------
*
* MACHINE MICROPROCESSOR OPERATING COMPILER DHRYSTONES/SEC.
* TYPE SYSTEM NO REG REGS
* -------------------------- ------------ ----------- ---------------
* Commodore 64 6510-1MHz C64 ROM C Power 2.8 36 36
* HP-110 8086-5.33Mhz MSDOS 2.11 Lattice 2.14 284 284
* IBM PC/XT 8088-4.77Mhz PC/IX cc 271 294
* CCC 3205 ? Xelos(SVR2) cc 279 296
* Perq-II 2901 bitslice Accent S5c cc (CMU) 301 301
* IBM PC/XT 8088-4.77Mhz COHERENT 2.3.43 MarkWilliams cc 296 317
* Cosmos 68000-8Mhz UniSoft cc 305 322
* IBM PC/XT 8088-4.77Mhz Venix/86 2.0 cc 297 324
* DEC PRO 350 11/23 Venix/PRO SVR2 cc 299 325
* IBM PC 8088-4.77Mhz MSDOS 2.0 b16cc 2.0 310 340
* PDP11/23 11/23 Venix (V7) cc 320 358
* Commodore Amiga ? Lattice 3.02 368 371
* PC/XT 8088-4.77Mhz Venix/86 SYS V cc 339 377
* IBM PC 8088-4.77Mhz MSDOS 2.0 CI-C86 2.20M 390 390
* IBM PC/XT 8088-4.77Mhz PCDOS 2.1 Wizard 2.1 367 403
* IBM PC/XT 8088-4.77Mhz PCDOS 3.1 Lattice 2.15 403 403 @
* Colex DM-6 68010-8Mhz Unisoft SYSV cc 378 410
* IBM PC 8088-4.77Mhz PCDOS 3.1 Datalight 1.10 416 416
* IBM PC NEC V20-4.77Mhz MSDOS 3.1 MS 3.1 387 420
* IBM PC/XT 8088-4.77Mhz PCDOS 2.1 Microsoft 3.0 390 427
* IBM PC NEC V20-4.77Mhz MSDOS 3.1 MS 3.1 (186) 393 427
* PDP-11/34 - UNIX V7M cc 387 438
* IBM PC 8088, 4.77mhz PC-DOS 2.1 Aztec C v3.2d 423 454
* Tandy 1000 V20, 4.77mhz MS-DOS 2.11 Aztec C v3.2d 423 458
* Tandy TRS-16B 68000-6Mhz Xenix 1.3.5 cc 438 458
* PDP-11/34 - RSTS/E decus c 438 495
* Onyx C8002 Z8000-4Mhz IS/1 1.1 (V7) cc 476 511
* CCC 3230 Xelos (SysV.2) cc 507 565
* Tandy TRS-16B 68000-6Mhz Xenix 1.3.5 Green Hills 609 617
* DEC PRO 380 11/73 Venix/PRO SVR2 cc 577 628
* FHL QT+ 68000-10Mhz Os9/68000 version 1.3 603 649 FH
* Apollo DN550 68010-?Mhz AegisSR9/IX cc 3.12 666 666
* HP-110 8086-5.33Mhz MSDOS 2.11 Aztec-C 641 676
* ATT PC6300 8086-8Mhz MSDOS 2.11 b16cc 2.0 632 684
* IBM PC/AT 80286-6Mhz PCDOS 3.0 CI-C86 2.1 666 684
* Tandy 6000 68000-8Mhz Xenix 3.0 cc 694 694
* IBM PC/AT 80286-6Mhz Xenix 3.0 cc 684 704 MM
* Macintosh 68000-7.8Mhz 2M Mac Rom Mac C 32 bit int 694 704
* Macintosh 68000-7.7Mhz - MegaMax C 2.0 661 709
* IBM PC/AT 80286-6Mhz Xenix 3.0 cc 704 714 LM
* Codata 3300 68000-8Mhz UniPlus+ (v7) cc 678 725
* WICAT MB 68000-8Mhz System V WICAT C 4.1 585 731 ~
* Cadmus 9000 68010-10Mhz UNIX cc 714 735
* AT&T 6300 8086-8Mhz Venix/86 SVR2 cc 668 743
* Cadmus 9790 68010-10Mhz 1MB SVR0,Cadmus3.7 cc 720 747
* NEC PC9801F 8086-8Mhz PCDOS 2.11 Lattice 2.15 768 - @
* ATT PC6300 8086-8Mhz MSDOS 2.11 CI-C86 2.20M 769 769
* Burroughs XE550 68010-10Mhz Centix 2.10 cc 769 769 CT1
* EAGLE/TURBO 8086-8Mhz Venix/86 SVR2 cc 696 779
* ALTOS 586 8086-10Mhz Xenix 3.0b cc 724 793
* DEC 11/73 J-11 micro Ultrix-11 V3.0 System V 735 793
* ATT 3B2/300 WE32000-?Mhz UNIX 5.0.2 cc 735 806
* Apollo DN320 68010-?Mhz AegisSR9/IX cc 3.12 806 806
* IRIS-2400 68010-10Mhz UNIX System V cc 772 829
* Atari 520ST 68000-8Mhz TOS DigResearch 839 846
* IBM PC/AT 80286-6Mhz PCDOS 3.0 MS 3.0(large) 833 847 LM
* WICAT MB 68000-8Mhz System V WICAT C 4.1 675 853 S~
* VAX 11/750 - Ultrix 1.1 4.2BSD cc 781 862
* CCC 7350A 68000-8MHz UniSoft V.2 cc 821 875
* VAX 11/750 - UNIX 4.2bsd cc 862 877
* Fast Mac 68000-7.7Mhz - MegaMax C 2.0 839 904 +
* IBM PC/XT 8086-9.54Mhz PCDOS 3.1 Microsoft 3.0 833 909 C1
* DEC 11/44 Ultrix-11 V3.0 System V 862 909
* Macintosh 68000-7.8Mhz 2M Mac Rom Mac C 16 bit int 877 909 S
* CCC 3210 ? Xelos R01(SVR2) cc 849 924
* CCC 3220 ? Ed. 7 v2.3 cc 892 925
* IBM PC/AT 80286-6Mhz Xenix 3.0 cc -i 909 925
* AT&T 6300 8086, 8mhz MS-DOS 2.11 Aztec C v3.2d 862 943
* IBM PC/AT 80286-6Mhz Xenix 3.0 cc 892 961
* VAX 11/750 w/FPA Eunice 3.2 cc 914 976
* IBM PC/XT 8086-9.54Mhz PCDOS 3.1 Wizard 2.1 892 980 C1
* IBM PC/XT 8086-9.54Mhz PCDOS 3.1 Lattice 2.15 980 980 C1
* Plexus P35 68000-10Mhz UNIX System III cc 984 980
* PDP-11/73 KDJ11-AA 15Mhz UNIX V7M 2.1 cc 862 981
* VAX 11/750 w/FPA UNIX 4.3bsd cc 994 997
* IRIS-1400 68010-10Mhz UNIX System V cc 909 1000
* IBM PC/AT 80286-6Mhz Venix/86 2.1 cc 961 1000
* IBM PC/AT 80286-6Mhz PCDOS 3.0 b16cc 2.0 943 1063
* Zilog S8000/11 Z8001-5.5Mhz Zeus 3.2 cc 1011 1084
* NSC ICM-3216 NSC 32016-10Mhz UNIX SVR2 cc 1041 1084
* IBM PC/AT 80286-6Mhz PCDOS 3.0 MS 3.0(small) 1063 1086
* VAX 11/750 w/FPA VMS VAX-11 C 2.0 958 1091
* Stride 68000-10Mhz System-V/68 cc 1041 1111
* Plexus P/60 MC68000-12.5Mhz UNIX SYSIII Plexus 1111 1111
* ATT PC7300 68010-10Mhz UNIX 5.2 cc 1041 1111
* CCC 3230 ? Xelos R01(SVR2) cc 1040 1126
* Stride 68000-12Mhz System-V/68 cc 1063 1136
* IBM PC/AT 80286-6Mhz Venix/286 SVR2 cc 1056 1149
* Plexus P/60 MC68000-12.5Mhz UNIX SYSIII Plexus 1111 1163 T
* IBM PC/AT 80286-6Mhz PCDOS 3.0 Datalight 1.10 1190 1190
* ATT PC6300+ 80286-6Mhz MSDOS 3.1 b16cc 2.0 1111 1219
* IBM PC/AT 80286-6Mhz PCDOS 3.1 Wizard 2.1 1136 1219
* Sun2/120 68010-10Mhz Sun 4.2BSD cc 1136 1219
* IBM PC/AT 80286-6Mhz PCDOS 3.0 CI-C86 2.20M 1219 1219
* WICAT PB 68000-8Mhz System V WICAT C 4.1 998 1226 ~
* MASSCOMP 500 68010-10MHz RTU V3.0 cc (V3.2) 1156 1238
* Alliant FX/8 IP (68012-12Mhz) Concentrix cc -ip;exec -i 1170 1243 FX
* Cyb DataMate 68010-12.5Mhz Uniplus 5.0 Unisoft cc 1162 1250
* PDP 11/70 - UNIX 5.2 cc 1162 1250
* IBM PC/AT 80286-6Mhz PCDOS 3.1 Lattice 2.15 1250 1250
* IBM PC/AT 80286-7.5Mhz Venix/86 2.1 cc 1190 1315 *15
* Sun2/120 68010-10Mhz Standalone cc 1219 1315
* Intel 380 80286-8Mhz Xenix R3.0up1 cc 1250 1315 *16
* Sequent Balance 8000 NS32032-10MHz Dynix 2.0 cc 1250 1315 N12
* IBM PC/DSI-32 32032-10Mhz MSDOS 3.1 GreenHills 2.14 1282 1315 C3
* ATT 3B2/400 WE32100-?Mhz UNIX 5.2 cc 1315 1315
* CCC 3250XP - Xelos R01(SVR2) cc 1215 1318
* IBM PC/RT 032 RISC(801?)?Mhz BSD 4.2 cc 1248 1333 RT
* DG MV4000 - AOS/VS 5.00 cc 1333 1333
* IBM PC/AT 80286-8Mhz Venix/86 2.1 cc 1275 1380 *16
* IBM PC/AT 80286-6Mhz MSDOS 3.0 Microsoft 3.0 1250 1388
* ATT PC6300+ 80286-6Mhz MSDOS 3.1 CI-C86 2.20M 1428 1428
* COMPAQ/286 80286-8Mhz Venix/286 SVR2 cc 1326 1443
* IBM PC/AT 80286-7.5Mhz Venix/286 SVR2 cc 1333 1449 *15
* WICAT PB 68000-8Mhz System V WICAT C 4.1 1169 1464 S~
* Tandy II/6000 68000-8Mhz Xenix 3.0 cc 1384 1477
* WICAT MB 68000-12.5Mhz System V WICAT C 4.1 1246 1537 ~
* IBM PC/AT 80286-9Mhz SCO Xenix V cc 1540 1556 *18
* Cyb DataMate 68010-12.5Mhz Uniplus 5.0 Unisoft cc 1470 1562 S
* VAX 11/780 - UNIX 5.2 cc 1515 1562
* MicroVAX-II - - - 1562 1612
* VAX 11/780 - UNIX 4.3bsd cc 1646 1662
* Apollo DN660 - AegisSR9/IX cc 3.12 1666 1666
* ATT 3B20 - UNIX 5.2 cc 1515 1724
* NEC PC-98XA 80286-8Mhz PCDOS 3.1 Lattice 2.15 1724 1724 @
* HP9000-500 B series CPU HP-UX 4.02 cc 1724 -
* IBM PC/STD 80286-8Mhz MSDOS 3.0 Microsoft 3.0 1724 1785 C2
* WICAT MB 68000-12.5Mhz System V WICAT C 4.1 1450 1814 S~
* WICAT PB 68000-12.5Mhz System V WICAT C 4.1 1530 1898 ~
* DEC-2065 KL10-Model B TOPS-20 6.1FT5 Port. C Comp. 1937 1946
* Gould PN6005 - UTX 1.1(4.2BSD) cc 1675 1964
* DEC2060 KL-10 TOPS-20 cc 2000 2000 &
* VAX 11/785 - UNIX 5.2 cc 2083 2083
* VAX 11/785 - VMS VAX-11 C 2.0 2083 2083
* VAX 11/785 - UNIX SVR2 cc 2123 2083
* VAX 11/785 - ULTRIX-32 1.1 cc 2083 2091
* VAX 11/785 - UNIX 4.3bsd cc 2135 2136
* WICAT PB 68000-12.5Mhz System V WICAT C 4.1 1780 2233 S~
* Pyramid 90x - OSx 2.3 cc 2272 2272
* Pyramid 90x FPA,cache,4Mb OSx 2.5 cc no -O 2777 2777
* Pyramid 90x w/cache OSx 2.5 cc w/-O 3333 3333
* IBM-4341-II - VM/SP3 Waterloo C 1.2 3333 3333
* IRIS-2400T 68020-16.67Mhz UNIX System V cc 3105 3401
* Celerity C-1200 ? UNIX 4.2BSD cc 3485 3468
* SUN 3/75 68020-16.67Mhz SUN 4.2 V3 cc 3333 3571
* IBM-4341 Model 12 UTS 5.0 ? 3685 3685
* SUN-3/160 68020-16.67Mhz Sun 4.2 V3.0A cc 3381 3764
* Sun 3/180 68020-16.67Mhz Sun 4.2 cc 3333 3846
* IBM-4341 Model 12 UTS 5.0 ? 3910 3910 MN
* MC 5400 68020-16.67MHz RTU V3.0 cc (V4.0) 3952 4054
* NCR Tower32 68020-16.67Mhz SYS 5.0 Rel 2.0 cc 3846 4545
* Gould PN9080 - UTX-32 1.1c cc - 4629
* MC 5600/5700 68020-16.67MHz RTU V3.0 cc (V4.0) 4504 4746 %
* Gould 1460-342 ECL proc UTX/32 1.1/c cc 5342 5677 G1
* VAX 8600 - UNIX 4.3bsd cc 7024 7088
* VAX 8600 - VMS VAX-11 C 2.0 7142 7142
* Alliant FX/8 CE Concentrix cc -ce;exec -c 6952 7655 FX
* CCI POWER 6/32 COS(SV+4.2) cc 7500 7800
* CCI POWER 6/32 POWER 6 UNIX/V cc 8236 8498
* CCI POWER 6/32 4.2 Rel. 1.2b cc 8963 9544
* Sperry (CCI Power 6) 4.2BSD cc 9345 10000
* CRAY-X-MP/12 105Mhz COS 1.14 Cray C 10204 10204
* IBM-3083 - UTS 5.0 Rel 1 cc 16666 12500
* CRAY-1A 80Mhz CTSS Cray C 2.0 12100 13888
* IBM-3083 - VM/CMS HPO 3.4 Waterloo C 1.2 13889 13889
* Amdahl 470 V/8 UTS/V 5.2 cc v1.23 15560 15560
* CRAY-X-MP/48 105Mhz CTSS Cray C 2.0 15625 17857
* Amdahl 580 - UTS 5.0 Rel 1.2 cc v1.5 23076 23076
* Amdahl 5860 UTS/V 5.2 cc v1.23 28970 28970
*
* Student1 RS/6000 ???MHz AIX cc 28600
* SGI Indigo R3000 33MHz Irix 5.3 cc 35800 RN
* SGI Indy R4600SC 133MHz Irix 5.3 cc 194000 RN
*
* NOTE
* * Crystal changed from 'stock' to listed value.
* + This Macintosh was upgraded from 128K to 512K in such a way that
* the new 384K of memory is not slowed down by video generator accesses.
* % Single processor; MC == MASSCOMP
* & A version 7 C compiler written at New Mexico Tech.
* @ vanilla Lattice compiler used with MicroPro standard library
* S Shorts used instead of ints
* T with Chris Torek's patches (whatever they are).
* ~ For WICAT Systems: MB=MultiBus, PB=Proprietary Bus
* LM Large Memory Model. (Otherwise, all 80x8x results are small model)
* MM Medium Memory Model. (Otherwise, all 80x8x results are small model)
* C1 Univation PC TURBO Co-processor; 9.54Mhz 8086, 640K RAM
* C2 Seattle Telecom STD-286 board
* C3 Definicon DSI-32 coprocessor
* C? Unknown co-processor board?
* CT1 Convergent Technologies MegaFrame, 1 processor.
* MN Using Mike Newtons 'optimizer' (see net.sources).
* G1 This Gould machine has 2 processors and was able to run 2 dhrystone
* Benchmarks in parallel with no slowdown.
* FH FHC == Frank Hogg Labs (Hazelwood Uniquad 2 in an FHL box).
* FX The Alliant FX/8 is a system consisting of 1-8 CEs (computation
* engines) and 1-12 IPs (interactive processors). Note N8 applies.
* RN Average for several sizes of loop, but it's a suspiciously round
* number. This times(2) was counting whole seconds.
* RT This is one of the RT's that CMU has been using for awhile. I'm
* not sure that this is identical to the machine that IBM is selling
* to the public.
* Nnn This machine has multiple processors, allowing "nn" copies of the
* benchmark to run in the same time as 1 copy.
* ? I don't trust results marked with '?'. These were sent to me with
* either incomplete info, or with times that just don't make sense.
* ?? means I think the performance is too poor, ?! means too good.
* If anybody can confirm these figures, please respond.
*
* ABBREVIATIONS
* CCC Concurrent Computer Corp. (was Perkin-Elmer)
* MC Masscomp
*
*--------------------------------RESULTS END----------------------------------
*
* The following program contains statements of a high-level programming
* language (C) in a distribution considered representative:
*
* assignments 53%
* control statements 32%
* procedure, function calls 15%
*
* 100 statements are dynamically executed. The program is balanced with
* respect to the three aspects:
* - statement type
* - operand type (for simple data types)
* - operand access
* operand global, local, parameter, or constant.
*
* The combination of these three aspects is balanced only approximately.
*
* The program does not compute anything meaningfull, but it is
* syntactically and semantically correct.
*
*/
char *strcpy();
/* Accuracy of timings and human fatigue controlled by next two lines */
/*#define LOOPS 50000 /* Use this for slow or 16 bit machines */
#define LOOPS 500000 /* Use this for faster machines */
/* Compiler dependent options */
#undef NOENUM /* Define if compiler has no enum's */
#undef NOSTRUCTASSIGN /* Define if compiler can't assign structures */
/* define only one of the next two defines */
/* #define TIMES /* Use times(2) time function */
#define TIME /* Use time(2) time function */
/* define the granularity of your times(2) function (when used) */
#define HZ 100 /* times(2) returns 1/60 second (most) */
/* for compatibility with goofed up version */
/*#define GOOF /* Define if you want the goofed up version */
#ifdef GOOF
char Version[] = "1.0";
#else
char Version[] = "1.1";
#endif
#ifdef NOSTRUCTASSIGN
#define structassign(d, s) memcpy(&(d), &(s), sizeof(d))
#else
#define structassign(d, s) d = s
#endif
#ifdef NOENUM
#define Ident1 1
#define Ident2 2
#define Ident3 3
#define Ident4 4
#define Ident5 5
typedef int Enumeration;
#else
typedef enum {Ident1, Ident2, Ident3, Ident4, Ident5} Enumeration;
#endif
typedef int OneToThirty;
typedef int OneToFifty;
typedef char CapitalLetter;
typedef char String30[31];
typedef int Array1Dim[51];
typedef int Array2Dim[51][51];
struct Record
{
struct Record *PtrComp;
Enumeration Discr;
Enumeration EnumComp;
OneToFifty IntComp;
String30 StringComp;
};
typedef struct Record RecordType;
typedef RecordType * RecordPtr;
typedef int boolean;
#define NULL 0
#define TRUE 1
#define FALSE 0
#ifndef REG
#define REG
#endif
extern Enumeration Func1();
extern boolean Func2();
main()
{
Proc0();
exit(0);
}
/*
* Package 1
*/
int IntGlob;
boolean BoolGlob;
char Char1Glob;
char Char2Glob;
Array1Dim Array1Glob;
Array2Dim Array2Glob;
RecordType xxx, yyy;
RecordPtr PtrGlb = &xxx;
RecordPtr PtrGlbNext=&yyy;
Proc0()
{
OneToFifty IntLoc1;
REG OneToFifty IntLoc2;
OneToFifty IntLoc3;
REG char CharLoc;
REG char CharIndex;
Enumeration EnumLoc;
String30 String1Loc;
String30 String2Loc;
#ifdef TIME
long time();
long starttime;
long benchtime;
long nulltime;
register unsigned int i;
starttime = time( (long *) 0);
for (i = 0; i < LOOPS; ++i);
nulltime = time( (long *) 0) - starttime; /* Computes o'head of loop */
#endif
#ifdef TIMES
unsigned char tms[5];
long starttime, benchtime, nulltime;
register unsigned int i;
register int bb;
times(tms); starttime = 0;
for (bb = 3; bb >= 0; bb--)
starttime = (starttime << 8) + tms[bb];
for (i = 0; i < LOOPS; ++i);
times(tms);
nulltime = 0;
for (bb = 3; bb >= 0; bb--)
nulltime = (nulltime << 8) + tms[bb];
nulltime = nulltime - starttime; /* Computes overhead of looping */
#endif
PtrGlb->PtrComp = PtrGlbNext;
PtrGlb->Discr = Ident1;
PtrGlb->EnumComp = Ident3;
PtrGlb->IntComp = 40;
strcpy(PtrGlb->StringComp, "DHRYSTONE PROGRAM, SOME STRING");
#ifndef GOOF
strcpy(String1Loc, "DHRYSTONE PROGRAM, 1'ST STRING"); /*GOOF*/
#endif
Array2Glob[8][7] = 10; /* Was missing in published program */
/*****************
-- Start Timer --
*****************/
#ifdef TIME
starttime = time( (long *) 0);
#endif
#ifdef TIMES
times(tms); starttime = 0;
for (bb = 3; bb >= 0; bb--)
starttime = (starttime << 8) + tms[bb];
#endif
for (i = 0; i < LOOPS; ++i)
{
Proc5();
Proc4();
IntLoc1 = 2;
IntLoc2 = 3;
strcpy(String2Loc, "DHRYSTONE PROGRAM, 2'ND STRING");
EnumLoc = Ident2;
BoolGlob = ! Func2(String1Loc, String2Loc);
while (IntLoc1 < IntLoc2)
{
IntLoc3 = 5 * IntLoc1 - IntLoc2;
Proc7(IntLoc1, IntLoc2, &IntLoc3);
++IntLoc1;
}
Proc8(Array1Glob, Array2Glob, IntLoc1, IntLoc3);
Proc1(PtrGlb);
for (CharIndex = 'A'; CharIndex <= Char2Glob; ++CharIndex)
if (EnumLoc == Func1(CharIndex, 'C'))
Proc6(Ident1, &EnumLoc);
IntLoc3 = IntLoc2 * IntLoc1;
IntLoc2 = IntLoc3 / IntLoc1;
IntLoc2 = 7 * (IntLoc3 - IntLoc2) - IntLoc1;
Proc2(&IntLoc1);
}
/*****************
-- Stop Timer --
*****************/
#ifdef TIME
benchtime = time( (long *) 0) - starttime - nulltime;
printf("Dhrystone(%s) time for %d passes = %d\n",
Version,
(long) LOOPS, benchtime);
printf("This machine benchmarks at %d dhrystones/second\n",
((long) LOOPS) / benchtime);
#endif
#ifdef TIMES
times(tms);
benchtime = 0;
for (bb = 3; bb >= 0; bb--)
benchtime = (benchtime << 8) + tms[bb];
benchtime = benchtime - starttime - nulltime;
printf("Dhrystone(%s) time for %d passes = %d\n",
Version,
(long) LOOPS, benchtime/HZ);
printf("This machine benchmarks at %d dhrystones/second\n",
((long) LOOPS) * HZ / benchtime);
#endif
}
Proc1(PtrParIn)
REG RecordPtr PtrParIn;
{
#define NextRecord (*(PtrParIn->PtrComp))
structassign(NextRecord, *PtrGlb);
PtrParIn->IntComp = 5;
NextRecord.IntComp = PtrParIn->IntComp;
NextRecord.PtrComp = PtrParIn->PtrComp;
Proc3(NextRecord.PtrComp);
if (NextRecord.Discr == Ident1)
{
NextRecord.IntComp = 6;
Proc6(PtrParIn->EnumComp, &NextRecord.EnumComp);
NextRecord.PtrComp = PtrGlb->PtrComp;
Proc7(NextRecord.IntComp, 10, &NextRecord.IntComp);
}
else
structassign(*PtrParIn, NextRecord);
#undef NextRecord
}
Proc2(IntParIO)
OneToFifty *IntParIO;
{
REG OneToFifty IntLoc;
REG Enumeration EnumLoc;
IntLoc = *IntParIO + 10;
for(;;)
{
if (Char1Glob == 'A')
{
--IntLoc;
*IntParIO = IntLoc - IntGlob;
EnumLoc = Ident1;
}
if (EnumLoc == Ident1)
break;
}
}
Proc3(PtrParOut)
RecordPtr *PtrParOut;
{
if (PtrGlb != NULL)
*PtrParOut = PtrGlb->PtrComp;
else
IntGlob = 100;
Proc7(10, IntGlob, &PtrGlb->IntComp);
}
Proc4()
{
REG boolean BoolLoc;
BoolLoc = Char1Glob == 'A';
BoolLoc |= BoolGlob;
Char2Glob = 'B';
}
Proc5()
{
Char1Glob = 'A';
BoolGlob = FALSE;
}
extern boolean Func3();
Proc6(EnumParIn, EnumParOut)
REG Enumeration EnumParIn;
REG Enumeration *EnumParOut;
{
*EnumParOut = EnumParIn;
if (! Func3(EnumParIn) )
*EnumParOut = Ident4;
switch (EnumParIn)
{
case Ident1: *EnumParOut = Ident1; break;
case Ident2: if (IntGlob > 100) *EnumParOut = Ident1;
else *EnumParOut = Ident4;
break;
case Ident3: *EnumParOut = Ident2; break;
case Ident4: break;
case Ident5: *EnumParOut = Ident3;
}
}
Proc7(IntParI1, IntParI2, IntParOut)
OneToFifty IntParI1;
OneToFifty IntParI2;
OneToFifty *IntParOut;
{
REG OneToFifty IntLoc;
IntLoc = IntParI1 + 2;
*IntParOut = IntParI2 + IntLoc;
}
Proc8(Array1Par, Array2Par, IntParI1, IntParI2)
Array1Dim Array1Par;
Array2Dim Array2Par;
OneToFifty IntParI1;
OneToFifty IntParI2;
{
REG OneToFifty IntLoc;
REG OneToFifty IntIndex;
IntLoc = IntParI1 + 5;
Array1Par[IntLoc] = IntParI2;
Array1Par[IntLoc+1] = Array1Par[IntLoc];
Array1Par[IntLoc+30] = IntLoc;
for (IntIndex = IntLoc; IntIndex <= (IntLoc+1); ++IntIndex)
Array2Par[IntLoc][IntIndex] = IntLoc;
++Array2Par[IntLoc][IntLoc-1];
Array2Par[IntLoc+20][IntLoc] = Array1Par[IntLoc];
IntGlob = 5;
}
Enumeration Func1(CharPar1, CharPar2)
CapitalLetter CharPar1;
CapitalLetter CharPar2;
{
REG CapitalLetter CharLoc1;
REG CapitalLetter CharLoc2;
CharLoc1 = CharPar1;
CharLoc2 = CharLoc1;
if (CharLoc2 != CharPar2)
return (Ident1);
else
return (Ident2);
}
boolean Func2(StrParI1, StrParI2)
String30 StrParI1;
String30 StrParI2;
{
REG OneToThirty IntLoc;
REG CapitalLetter CharLoc;
IntLoc = 1;
while (IntLoc <= 1)
if (Func1(StrParI1[IntLoc], StrParI2[IntLoc+1]) == Ident1)
{
CharLoc = 'A';
++IntLoc;
}
if (CharLoc >= 'W' && CharLoc <= 'Z')
IntLoc = 7;
if (CharLoc == 'X')
return(TRUE);
else
{
if (strcmp(StrParI1, StrParI2) > 0)
{
IntLoc += 7;
return (TRUE);
}
else
return (FALSE);
}
}
boolean Func3(EnumParIn)
REG Enumeration EnumParIn;
{
REG Enumeration EnumLoc;
EnumLoc = EnumParIn;
if (EnumLoc == Ident3) return (TRUE);
return (FALSE);
}
#ifdef NOSTRUCTASSIGN
memcpy(d, s, l)
register char *d;
register char *s;
register int l;
{
while (l--) *d++ = *s++;
}
#endif